How do you change a SawStop blade?

How to Change a SawStop Blade: A Step-by-Step Guide

If you’re a woodworker, you know the importance of having a sharp saw blade. A dull blade not only affects the quality of your cuts, but it can also be dangerous to use. That’s why it’s crucial to know how to change a SawStop blade.

SawStop is a top-of-the-line table saw that comes with a safety feature that stops the blade within milliseconds of skin contact. This makes it one of the safest saws on the market. But, as with any saw, the blade will eventually dull and need to be replaced. In this article, we’ll show you how to change a SawStop blade in just a few easy steps.

Step 1: Unplug the Saw

Before you start changing the blade, it’s important to make sure the saw is unplugged. This will prevent any accidental start-ups while you’re working on it. Safety first!

Step 2: Remove the Blade Guard

Next, you’ll need to remove the blade guard. This is a clear plastic cover that sits over the blade. To remove it, simply lift it up and off the saw. Be sure to set it aside in a safe place so you don’t misplace it.

Step 3: Loosen the Blade

Now that the blade guard is removed, you’ll need to loosen the blade. To do this, locate the blade tension knob on the side of the saw. Turn it counterclockwise until the blade is loose. You should be able to lift the blade up and out of the saw with ease.

Step 4: Remove the Blade

Once the blade is loose, carefully lift it out of the saw. Be sure to hold onto the blade with both hands and keep your fingers away from the sharp edges. Place the blade in a safe place where it won’t cause any harm.

Step 5: Install the New Blade

Now that the old blade is removed, it’s time to install the new one. Take the new blade and place it into the saw, making sure the teeth are facing the correct direction. Once the blade is in place, tighten the blade tension knob by turning it clockwise. You want the blade to be tight enough that it won’t move while you’re cutting, but not so tight that it’s difficult to turn the saw on and off.

Step 6: Reinstall the Blade Guard

The final step is to reinstall the blade guard. Simply place it back over the blade and make sure it’s securely in place. This will help protect you from any accidental contact with the blade while you’re using the saw.


Changing a SawStop blade is a quick and easy process that can be done in just a few minutes. By following these steps, you’ll be able to keep your saw running smoothly and safely. And, with a sharp blade, you’ll be able to make precise cuts every time.

So, don’t let a dull blade hold you back. Change your SawStop blade today and get back to making beautiful, accurate cuts in no time!